Koi Pro Digi Test 4in1

Description

Koi Pro Digi Test 4in1

The SuperFish Koi Pro DigiTest 4-in-1 is an accurate 4-in-1 digital meter for measuring 4 different water parameters in ponds. The multifunctional meter provides readings for the conductivity (EC), total dissolved solids (TDS), acidity (pH) and temperature (°C/°F) of your pond water quickly and easily.

SuperFish Koi Pro DigiTest 4-in-1 Features:

• Measures 4 different water values
• Acidity (pH) from 0.00-14.00 with an accuracy of 0.05 units.
• Total dissolved solids (TDS) from 0-9999 ppm ± 2%.
• Conductivity (EC) from 0-9999 μS/cm ± 2% .
• Temperature in Celsius (°C) and Fahrenheit (°F).
• The meter has an automatic 3-point pH-calibration function (4.00 – 9.18 – 6.86).
• Calibration powders are included.
• The meter has an automatic temperature compensation function.
• Auto shut-down after 5 min.

Instructions:
– Remove the protective cap before use.
– Press the on/off button.
– Dip the meter in the water up to the immersion line.
– Wait approximately 30 seconds until the measurement is numerically stable.
– Press HOLD/TEMP to log the test results.
– Remove the meter from the water to read the test results.
– The MODE/CAL button allows you to switch between the test modes.
– Pressing HOLD/TEMP for 3 seconds will toggle between °C and °F.
– Shut the meter down.
– Rinse the electrode with distilled water, dry with a tissue and place back the protective cap.
– Avoid heat and direct sunlight.

Note: The meter is NOT waterproof, never dip the meter into the water beyond the immersion line.

If you have any questions about this Koi Pro Digi Test 4in1 and whether it’s the right product for your pond, please contact us and a member of our friendly store team will be more than happy to answer all of your questions.

Love Koi and Ponds? Why not check out our sister site Shirley Koi where you will find our finest high grade Japanese Koi available.