D-D Reef-Pro 600 Aquarium

Constructed from crystal clear, low iron high clarity glass, the aquarium features a braceless design, producing a clean and modern display with easy access for maintainance.

By designing the tank to be wider than it is tall we create a more balanced aspect ratio which greatly enhances the viewing experience, allowing easier and more natural aquascaping and coral placement.

An internal weir box can become an unattractive focal point in any aquarium, dictating aquascaping and interupting flow patterns inside the tank.

With this in mind the 'invisible weir box' of the PRO-Reef models has been carefully designed to minimise intrusion into the aquarium whilst exceeding the functionality found in most aquariums.

The Twin pipe overflow system allows almost silent running whilst the use of the D-D UltraFlow weir comb allows the maximum amount of waterflow without raising the water height in the aquarium.

• Crystal clear, braceless aquarium with full polished edges to give an unimpeded view of your own personal reef.
• Balanced width to height ratio to enhance viewing, aquascaping and ease of coral placement.
• Unique 'Invisible weir box' design in black glass which almost disappears into the back of the aquarium.
• Multi-stage weir design provides a high turnover rate in the tank whilst minimising drain down levels in a power loss situation.
• Special 'Ultra-Flow' weir comb allows 30-50% more water through, so that larger flow rates can be used.
• Twin overflow pipes offer safe, silent operation.

Cabinet

The D-D Reef-Pro 600 Aquarium cabinet is designed to be extra tall to perfectly balance the aspect ratio of the aquarium and is built for D-D in the U.K to ensure a consistent high quality. 

The top, bottom and front structural uprights of the cabinet are made of 36mm board, making it extremely strong and rigid with excellent load bearing properties, giving the impression of a piece of furniture rather than just a simple tank cabinet. Note that as with any piece of furniture, spilled or standing water must be cleaned up immediately from the surface to prevent damage to the board.

The extra internal height inside the cabinet provides good headroom for use of taller equipment and benefits ease of maintainance. Access is further improved by incorporating removable quick release. double folding doors.

When installing any aquarium it is of the utmost importance to provide a level base, unlevelled cabinets can add stress the glass and can result in an uneven water level in the aquarium. The D-D aquarium cabinet design includes heavy duty adjustable feet allowing for full levelling of the cabinet and aquarium.

• Sleek, extra tall cabinet that offers the perfect viewing height for the aquarium.
• Modern, heavy duty cabinet construction with high quality finish to compliment the home environment.
• Extra height internal space for installation and maintenance of equipment.
• Cabinet supplied pre-assembled as standard.
• Removable quick release, folding door to offer improved access for maintenance.
• Lacquer coated, fully adjustable, soft close hinges.
• Adjustable feet to allow correct levelling of the aquarium on uneven floors.
• Good ventilation incorporated into the chiller and sump areas.

Sump

D-D have many decades of experience in designing, building and running large successful aquariums and have combined this knowledge to produce what we believe is the perfect simple sump layout for the space available.

The ultra quiet twin pipe weir system is further refined by the first section of the sump, resulting in a silent water return with no splashing or gurgling. If using the filter sock arrangement , the water then overflows into a twin filter sock section which incorporates a diffused silencer plate to reduce any water noise. The Reef Pro aquariums come as standard with a ClariSea ready sump, with this the filter sock section, if used, can be lifted out and replaced with a ClariSea unit with ease even when the aquarium is filled with water. The main overflow pipework provided will drop directly in to the ClariSea inlet fitting, so no cutting or changing of pipework is required.

After passing through the prefilter water flows into a large equipment compartment. This chamber can both hold equipment such as skimmers, media reactors, calcium reactors etc.

The final section is a return pump compartment which sits beside the integrated water top off reservoir.

• Sump supplied ClariSea ready as standard.
• Large skimmer / equipment section.
• Pump chamber.
• Built in top-up reservoir.

Specifications: