PO4 x4 Phosphate Remover
Maintaining the levels of waste products low while feeding your animals on a regular basis is essential for keeping invertebrates and fish in good health. In microbial well balanced aquaria, the two major pollutants are nitrates and phosphates. With current use of NP-Reducing BioPellets, it has become very easy to maintain nitrates and phosphate levels close to zero, however, in most tanks there is still a surplus of phosphates. Phosphate levels exceeding 0.03 ppm will negatively affect coral growth and higher levels will also negatively influence the health of your fish. In addition, high phosphate levels enhance the growth of annoying algae and cyanobacteria. Most of current phosphate reducing products are based on granular ferric hydroxide and leak iron-ions into your tank, which is enhancing algae growth and inhibiting coral growth and have a tendency to start clumping together, thus reducing its effectiveness.
They have a very high surface area and can absorb approximately 4 times more phosphate then most other phosphate removing products. Do not overdose! Rapid changes in phosphate can negatively affect your animals. Use small amounts of PO4X4 to gradually lower the phosphate levels in your aquarium.
Available Sizes:
250ml - will remove 3 ppm of phosphate and silicate from roughly 8,000 litre of fresh water or 4,000 litre of marine water
500ml - will remove 3 ppm of phosphate and silicate from roughly 16,000 litre of fresh water or 8,000 litre of marine water
If you have any questions about PO4 x4 Phosphate Remover and whether it's the right product for your aquarium, please contact us and a member of our friendly store team will be more than happy to answer all of your questions.
Additional information
| Size | 250ml, 500ml |
|---|---|
| Brands | DVH |
