NT Labs Magiclear Clear Pond Treatment 500ml

NT Labs Magiclear Clear Pond Treatment 500ml

NT Labs Magiclear is designed to clear green or cloudy water in your pond. Magiclear causes particles in the water to clump together which can then easily settle out of suspension or be removed by the filter.

Magiclear is harmless to fish and plants.

When to use?
When water appears green and/or cloudy. Magiclear clear pond treatment causes particles in the water to clump together which can then easily settle out of suspension or be removed by the filter.

How to use?

• Test the pH and KH of the water.
• Aerate pond well e.g. fountain, waterfall or air pump. Conduct a partial water change (as much as is practical) before use, especially if the water is extremely green, like “pea soup”.
• Switch off pump only if strong flow rate could prevent particles from clumping but remember to switch back on as soon as water clarifies.
• Mix the correct dose in a clean bucket of pond water, then pour evenly around the pond.
• Clean the collected particles from the filter after treatment.

Without a filter, some clumps may float and can then be removed using a net. Use when you have plenty of time to observe the fish and take action in the unlikely event of a reaction.

Do not:

• Do not use when the dissolved oxygen may be low (e.g. at daybreak, in hot, humid or thundery weather, or within three hours of feeding).
• Do not use if the KH is below 6 or the pH is below 7.
• Do not use if there is nitrite in the water.

Available Sizes:

250ml – treats 4546 litres (1000 gallons)

500ml – treats 9092 litres (2000 gallons)

1 Litre – treats 18,184 litres (4000 gallons)

If you have any questions about this NT Labs Magiclear Clear Pond Treatment 500ml and whether it's suitable for your aquatic pet, please contact us and a member of our friendly store team will be more than happy to answer all of your questions.

Why not Check out our YouTube channel for some videos of some of the most exciting products in store!