NT Chloramine T Koi Fish Treatment

Description

NT Labs Chloramine T Koi Fish Treatment

NT Labs Chloramine T can be used for the treatment against White Spot, Costia and bacterial Gill Disease, as well as the reduction of pathogenic bacterial levels.

When to use?
When fish show symptoms of a bacterial infection (ulcers, fin, tail or mouth rot, loose scales), parasitic infection (Costia, Trichodina, skin or gill flukes), flicking and rubbing against rough surfaces or gasping.

How to use?

• Test your water quality using a Pond Test Kit.
• Mix the appropriate dosage in a clean bucket of pond water and pour evenly over the surface of the pond. Switch off UV filtration until 48 hours after adding the final dose. Aerate the pond well during treatment.
• If you feel a repeat dose is necessary, check your diagnosis using the NT Labs Diagnosis Tool; a different medication may be more suitable. Allow 10 days after adding the final dose and perform a partial water change before re-treating or treating with a different medication.
• Always treat when you have time to observe fish and take appropriate action in the unlikely event of a bad reaction. Follow the safety information below throughout the course of treatment.

Warning:

• Do not use with orfe, rudd, tench or sturgeon/sterlet.
• Wear disposable vinyl or latex gloves and appropriate eye protection when handling this product.
• Do not use if the pH is below 7, the carbonate hardness (KH) is below 6°dH and/or the general hardness (GH) is below 6°dH. Do not use in bright sunlight or in hot, humid, thundery conditions.
• Do not use if the water temperature is below 10°C.
• Do not store in a hot place.
• Do not mix medications.

If you have any questions about this product and whether it’s the right treatment for your Koi, please contact us and a member of our friendly store team will be more than happy to answer all of your questions.